Select Page

What is hard water? It is water which comes out of a well and has plenty of iron in it. This water creates a host of problems for residential plumbing systems. If you see your bathtubs going rusty with stains, toilets, and even your bottles where you store water, then you know you have hard water issues. Clothes washed in them appear dingy and dirty.

To get rid of this problem, a DIY solution along with the help of plumbing services can be carried out, but all this depends on your budget. This solution is the ever present softener, which is a new age concept that reduces the iron in the water supply by nearly 90 percent and sometimes even more. This solution makes the water safer for drinking purposes for family members and pets at home.

The hard water softener method for residential plumbing systems is quite simple and the machine is similar to a water heater. Its tank filters the water through the grime or salt canister that removes and absorbs the iron deposits from the water drawn into the system.

In order to install the water softener, the hot water heater must be put in place before the water is allowed to flow, so that any additional waste is prevented from making its home within. This can be done by installing a bypass switch that diverts the flow of water from the main line and into the system.

The soft water machine should be set at a time when the usage of the water is low, for example late at night or early morning, because the water flows through the grime tank and exits back into the main water line and the chances of disruption exist during the day.

For safety purposes, wear protective clothing such as gloves and goggles to prevent injuries and illness while applying the water treatment technique. If you are in doubt, or are not too familiar with your plumbing system call professional plumbers to help you out. The expert services of plumbers in Maple Valley WA will take care of your hard water problems.

Hard and Soft Water: What’s The Difference?