Toilet leaks can waste over thousands of gallons every year. And it means wasting a lot of money. If you are suffering from a toilet leaks better to fix it right away or you are just wasting a ton of money by paying the water bill without using it properly. So the question now is how to fix a leaking toilet?
There are different causes why your toilet is leaking such as the damage or broken of water refill valve, Ballcock refill valve, wax ring under the bowl, or the slipped out of ballcock tube. These problems can be fixing by you without any help by a plumber.
Before you start fixing your toilet leaks at home, first you must spot or detect where the leak is. Detecting a leak is simple if you know how but if not here are the simple tips for you.
Look inside the tank, there are two valves – the refill and flush valves. Then you will also see some other parts like the float arm which is attached to the flush ball. Afterwards you inspect the parts and when you notice some strange like when the flushed does not work properly unlike before and the water from the tank always flow into the bowl, or when the water overflowing the tank. Most leaks are caused when the two valves failed to performed properly. Once you find the source of the leak, fixing it will be simple with the used of the proper plumbing tools and some basic plumbing skills.
How to fix a leaking toilet? Here are some tips for you to make fixing toilet leak simple
1. Repairing the water refill valve. In repairing the water refill valve there might be a broken line from the water supply which cause water to spout from the main water valve to the toilet. Before you fix it you need to empty the water inside the bowl so the first thing you need to do is to turn off the water supply valve which it stop the flow of water to the toilet. Then, flush the toilet and clutch down the handle until it is completely empty.
Now you can start fixing it by unscrewing the water supply line around the base with the use of the wrench. And put a towel beneath to gather every water drips. Then screw the loosen hose on the toilet, not tighten too much. Turn the water supply back and adjust the water, check for any leaks afterwards.
2. Ballcock Refill Valve – If this particular valve causes your toilet problem then it is best to consider these necessary steps. First of all, you need to switch off your water system. After that, check the volume of water. If ever the water level is insufficient you can modify the drift arm by twisting it. Also, you must always remember that the standard water level of water is 75% before it overflows. After that you are ready to go.
3. Plastic Refill Valve – If you want to repair a toilet in the case of your plastic refill valve, then follow these important actions. To begin with, always switch off the water. Next, look for the controller of the water level; it is usually called the hand nut. In case you want to increase the level of water you can rotate it clockwise, otherwise if the water level is insufficient then rotate it counter-clockwise.
4. Flush Valve – When you are having a problem on this particular valve, the first thing that you need to do is have a test whether if it flushes properly or not. Next is to check if the flapper ball perfectly closes the water reservoir. If ever it will not seal, then you can simply bend the arm until it suitably fits. Now, do a test if the flush valve is working back properly.
Moreover, you must also check around the base of the toilet if there are leakages or not. Double check them and have it sealed properly. Lastly, you need to tighten the mounting nut so that water will properly get to your toilet. If the problem still persists then it would then best to have a complete toilet replacement. In that case, you will never hard to worry on how to fix a leaking toilet.
Every homeowner must always remember that a clean and working toilet is a clean house. Consider these important tips and surely your toilet predicament will be resolved.