It is a known fact that hot tubs and spas heat water. This is why it is always better to aim to conserve as much of this heat as possible with these tips.

Covering your spa saves energy:

As heat rises, keeping your spa covered helps in retaining the heat that is generated in the spa. This is why most of the modern spas have well-insulated shells. With a cover that is in good condition, ensuring that the tie straps are snugly fit and latched when the spa is not in use helps in reducing leakage of heat.

However with deteriorated spa covers, heat leaks at the hinge-fold and spa shell rim with improper seating of the edges of the cover. If you find your spa cover to be heavy, it means that the foam core insulation is water logged. However as water logged covers have no R-value, it only leads to wastage of heating dollars. Instead, opt for a high quality replacement spa cover that saves energy, lasts longer, is more resistant to water absorption and helps in improving the beauty of the spa.

The benefits of Creating Windbreaks:

Windbreaks have to be created around the spa not only for privacy sakes, but also for reducing wind exposure that can lead to heat loss. Privacy panels, fencing, spa enclosures, coveralls and shrubs also work as effective windbreaks.

Tips for thermostat settings:

Factory spas have a high temperature limit of 104 degrees F. however by reducing the temperature to 102 degrees F; overall energy consumption is reduced considerably as you need more energy to heat additional degrees of your spa water.

What to do when going for a vacation:

When on a vacation, the thermostat has to be reduced. If you will not be around for a week or more during the warmer months, the heater can either be switched off or set at lowest levels. However in freezing weather, heating has to be maintained to prevent damage to pipes and plumbing during to freezing. Heating can be avoided if the spa is winterized, and its water removed from plumbing system.

Tips for off-peak heating:

Check with your power company to see if they offer reduced rates on power utilities during off peak hours, because of lowest demands. If your spa has a timer circuit, you could program your thermostat to heat the spa during off-peak heating. With a well insulated spa and a good cover, it is possible to maintain heat for a few hours, even when heater is switched off.

Blowers, lights and air jets used in spas:

The air induction jets in the spa offers soothing massage when in the spa. However by inducing air into the spa, it lowers the water temperature that has to be replaced with the spa heater. Do switch off air and water lights when the spa is not used.

Though powered air blowers were once popular, they are not favored. In fact, when buying new spas today, it is recommended not to buy one that has an air blower motor. These spas are not only loud; they consume lots of energy and lowers the water temperature rapidly.

Better and more expensive spas have adjustable hydro jets in them that induces warmed air from the equipment cabinet into the water. This is a better option for your spa than a motor driven blower.

About plumbing system and filter cartridge in spas:

The filters in the spa have to be cleaned with every water change and with non-foaming filter cleaning compound every 3 to 4 months. This is because a clogged spa filter reduces the circulation of the spa water, and strains the pump. Clogged filters also makes your heater element perform less efficiently. Filters have to be replaced annually for the peak performance of the spa, cleaner water and savings in energy.

Use a spa system flush for flushing the plumbing system and heater element when changing the water in the spa. This helps maintain uninterrupted water flow the efficient working of your heater element.

The floating thermal blanket reduces loss of heat with insulation and reduction of evaporation. Though a small investment is required for this blanket, it brings with itself Hugh returns with the added advantage of maintaining the build up of moisture in the spa to a minimum. This helps increase the life of the spa cover.

How to conserve water:

Water should not be wasted. So repair leaks if required, and adjust jets to ensure the streams of hot water are not sent to the deck.

Tips To Follow When Shopping for a New Spa:

When buying a new spa to replace an obsolete and energy wasting spa, shop wisely. Never overbuy horsepower as some manufacturers play the jet and horsepower numbers game. Remember that the more jets they offer, the more horsepower that is required for feeding the jets.

More than the number of jets, the design and engineering of the spa is important. With a well designed spa, you don’t need numerous jets for a soothing and vigorous hydro massage. Remember that the larger is the pump motor, the more power it consumes for its running. This in turn leads to huge power bills.

Spa And Hot Tub Heat Conservation